Crack and damage are very common problems during the synchronous belt wheel use . When synchronous belt wheel rupture or damaged condition, one is caused by the poor quality of synchronous belt wheel at the time of purchase, on the other hand there was an incorrect installation of a synchronous belt wheel or a drive when the foreign matter accidentally fall into internal gear, and then drive overspeed or there, more than the maximum load of the belt.Then in such cases ,what we can do ?
During the installation, do not use a screwdriver to pry pry hard, and do not exceed the recommended torque values under the circumstances, conduct sleeve screw tightening operation; install appropriate protective gear at the periphery of the baffle, avoid foreign objects falling into synchronous belt wheel; must ensure that transport synchronous belt wheel transmission speed is below the maximum recommended value.