The synchronous belt wheel runout is a common problem ,we may meet during the operation of synchronous belt wheel. When synchronous belt wheel is running in the system, the rotation of the belt tension of synchronous belt wheel periodically lift. The more powerful of the runout ,the higher of the maximum tension will be. Affected by this, the teeth of synchronous belt wheel were crushed as the bottom looks like. The crushed belt may be similar to the phenomenon caused by too high tension in the normal running . The tension variations often cause extreme cyclical belt teeth to tear or fracture belt tension.
Install synchronous belt wheel on the drogue, or in the smallest synchronous belt wheel on the basis of the pupil again after reaming installation, often prone to beating.Follow the standard to install, and ensure shaft hole to match is a way to reduce the runout of synchronous belt wheel.