Synchronous belt wheel manufacturers say during the installation of synchronous belt wheel, you must pay attention to the parallel of belt wheel axis , so that the center plane of the drive pulleys are in the same plane, to prevent deflection pulleys,and leaving with side pressed on the ring, causing side wear increased, even make the belt cut off by the rings.Synchronous belt wheel manufacturers say that the deflection pulleys should be adjusted, the skew angle is adjusted to within the allowable range. Ensuring the alignment of the pulleys, it should also ensure rigidity gear racks and axes.According to synchronous belt wheel manufacturers , When using pulleys, pulley rust must be removed to avoid premature wear of the belt.
Synchronous belt wheel manufacturers say the tension wheel can be use in such occasion:
a. When the center distance can not be adjusted, as a method of belt tension.
b. In the larger transmission ratio, increasing the wrap angle smaller pulley.