Synchronous belt wheel manufacturers say that whether it is due to the belt wheel does not meet the standards or worn beyond the standard caused premature failure ,which is often difficult to identify. Partly because when the belt fails, few people will carefully check the belt wheels and usually considered to be belt problems.
Synchronous belt wheel manufacturers tell us that excessive tension may cause more wear of belt wheels. Long-running belt tooth surface or canvas sometimes has completely worn away, this situation indicates pulley wear has also been produced. Synchronous belt wheel manufacturers remind us that after the belt wear ,will make contact with the wire belt wheels,and causing the outer circumferential groove pulley wheel also wear. Addendum pulley wheels are raised as a sign of wear after.
According to Synchronous belt wheel manufacturers, in corrosive atmospheres, pulley easiest to wear quickly. Alternatively, if the replacement of the new life of the belt after lower than the previous belts, also carefully examining the pulley for excessive wear.